+91 - 6392 000 590


  • Select State
  • Uttar Pradesh
  • - Select Location -
  • Prayagraj
  • Gorakhpur
  • Kushinagar
  • Azamgarh
  • Jaunpur
  • Faizabad
  • Deoriya
  • Banaras
  • Sultanpur
  • Basti
  • Mirzapur
  • Kaushambi
  • - select a work type -
  • Cc Tv Installation
  • CcTv UnInstallation
  • CcTv Repairing/Servicing


CcTv Installation/UnInstallation:

Rajservicesonline service provides you the best-skilled professionals at your doorstep just with a single Dial/click. We offer our best service at affordable prices. Our well-trained technicians are ready to serve you at any time. Our utmost aim is to satisfy you with loyal service. We offer our service to all Brands .we provide our service for both split and window air conditioners. Types of services we provide are:-

General service:-

Regular maintenance is required for any home appliances to keep it in proper working condition.  We offer the best service at any time.


We do all rpairs & branded spare parts are replaced at fixed prices.


Deep cleaning is required for removing the dust from your cctv to maintain proper working.

New & old ones are installed whenever you are required to install.

The cctv is removed when you are migrating to other residences.

Why Book  On Rajservices: 

We provide well-trained technicians at any time and lowcost is charged for our service.
Genuine spare parts are replaced when older ones get damaged with fixed pricing.
We offer service on slot of your choice.
We provide 30days service guarantee.

How Our Team Works:

We accept both online and offline booking repairs of the air conditioner. We send an efficient technician to your home to serve you at a reasonable cost. You can relax & the appliances will get into working condition soon.

 Common CCTV Problems and How to Fix Them:

It can be hard understanding the problems that occur with your CCTV, which is why our friendly team have put together a guide to help you to fix the issues.

1. Verify camera power and connection :

Sometimes a problem can be as simple as a disconnected lead and it might even be that the network is currently down. Internet protocol (IP) cameras generally have LED indicators that are used for transmitting data across to the network but this might be hidden inside the camera.

If the LEDs on the camera are not lighting up, you should check to see if the camera is powered externally (plugged into the wall). Should your camera be powered via electricity and not battery, you will want to check that the camera is receiving the appropriate wattage as a complicated camera such as a pan-tilt-zoom, will require more watts that a normal plug will supply.

2. Discover and ping camera :

Find out your camera’s IP address by checking the camera’s directory. Once you find your address you will be able to ‘ping’ it using your laptop or smartphone to test the strength of the connection.

Type ‘cmd’ into windows search engine and this should open a DOS command prompt. When this pops up, you will be asked to type in ‘ping’ and your IP address.

You may see either ‘Request Time Out’ or ‘Destination Host Unreachable’ appear on the screen. If it does, check to see if the device you are using is on the same network as your camera. If you do see the camera on the network, attempt to connect using your browser.

3. Know Username / Password :

If you can ping the camera but find yourself unable to connect then it’s possible that you have typed in the wrong login or password. If this is the cause, you will want to refer to the manual.

4. Check ARP tables :

Check Address Resolution Protocol (ARP) tables, usually located on the outside of the camera. It is possible to cross reference MAC and IP addresses using the ARP.

5. Confirm no IP conflict :

If you have more than one camera you need to make sure that they have different IP addresses as this can stop you from accessing one or all cameras.

6. Upgrade firmware :

See to it that your camera is up to date. You can do this by connecting to VMS and accessing the camera’s web page.

7. Reboot camera :

Sometimes it’s the first thing we do – turn the system off for 10-20 seconds and input your settings again.

8. Check cabling :

Make sure that the cables are straight and firmly intact, because if there are knots or loose cables this could be the root of your problem.

9. Factory reset camera :

This can be a drastic thing to do as you can lose all of your history but this process will help to troubleshoot any issues. A factory reset can be done simply by pushing a paperclip into the pinhole reset button located at the back.

10. Call manufacturer or remote monitoring provider for support :

If you’re ever unsure, seek help from an expert who can help you every step of the way.

Take confidence in our team here at Caught On Camera – we’re here to provide you with experience, simple instruction and a helpful, friendly service.

Translate »